Surround Sound Feedback (SSF)
in 12 Steps

What is surround sound Feedback?

Surround sound feedback ( SSF ) is in " layman's terms " a 7.1 surround system for your Virtual Pinball cabinet.

How does it work? This is really not that complicated and there is no need to be scared about it. Once the hardware is connected and the software configured, if the table supports it, you will hear the ball rolling at the different locations on the board and the speaker closest to the location of the ball will be activated. This way there is a real surround effect that enhances the game. The surround sound feedback also allows for contactor noises, bumper noises, coins insert, voices and flipper noises independently on the assigned speaker.

Step 1

The 1st step is to buy the hardware.

- 4 Exciters speakers 25W

- 2 2.1 audio Amps

- 7.1 audio compatible card

Step 2

install 2 exciters near your flipper buttons and 2 near the back of the cabinet.

Step 3

Connect The exciters to the AMP.

Step 4

Connect a filter on both AMP Aux 3.5 audio jack Input.

Step 5

Connect The front Left and right and sub

to the 2.1 Amp power supply. Do the same for rear exciters on the other Amp

Step 6

#7 is your back box speakers

#4 sometimes called surround you connect your rear exciters.

#3 Front Exciters

Step 7

You will need to install your 7.1 card software and Under Audio channels, if correctly configured, you will see 7.1. From there you can test all your speakers.